Pressure Washing, Sand Blasting, Vapor Blasting

You have to own the right equipment and know when to use it.

Pressure washing is pretty standard in every remedial project. But occasionally you're going to need to remove previous coatings or rust scale before you paint. For that, there's either sand blasting or the latest technology, vapor blasting.

The key to vapor blasting is the flow of a waterborne abrasive, giving a finer finish due to the flushing action of the water. No media is impregnated into the component, nor is there any dust created by the break-up of media, unlike dry blasting, where the finish is produced by sheer force of media impact.

Rigging

Safety is Priority One

We have trained our employees in rigging buildings. We have them "stage certified" each year. We have rigged some pretty difficult structures over the years: round buildings, cantilevered buildings, bridges, free standing towers, 30+ story buildings, multi-level buildings, and on, and on, and on.

Our Operations Facilitator, Steve, is exceptionally good at rigging and sees some travel throughout the state as our lead Rigging Expert. But it's not just him. Chris, Cliff, and quite a few others among our foremen are well-experienced, certified riggers.

Stucco & Concrete Repair

Know the latest products and techniques to fix it right.

Today’s concrete buildings deteriorate. They deteriorate for a variety of reasons. Many of which are avoidable. But when these conditions exist, the painting contractor should be prepared to, and experienced in, making the needed repairs.

The contractor must be able to provide to the customer with the reason for the failure and the required course of action to prevent its recurrence. He must have the craftsmen talented enough to execute the repair so it isn't noticeable and won't fail again when the work is complete.

Floor and Deck Coatings and Repair

It's all about the Preparation.

Floor coating is typically an on-grade application. Usually warehouse floors, gymnasiums, medical. or educational flooring. This application is usually performed with concrete stains, epoxy floor coatings, etc.

Deck Coatings are generally of a waterproofing nature and are usually above-grade. They are performed on balconies, above-grade walkways, concrete roof decks, above-grade parking decks, etc. These systems are traditionally urethanes, polyurea, epoxy, cement-based, etc.

Bead Blasting

Without a good foundation, no floor finish lasts.

When it comes to painting garage floors, proper preparation is the most essential task. Bead Blasting is the best preparation method for first time coating or recoats that were only chemically prepared the first time.

We scrape floors, grind floors, bead blast floors, and polish floors. Depending on the coating system requested and/or in place, selecting the right preparation method is key to a long lasting beautiful floor coating.

Waterproofing

Often oversold and overused, but most buildings will need it somewhere at sometime.

During the summer, Florida gets the most rainfall of any state in the US. Four of the ten most humid/wet cities in America are Jacksonville, Orlando, Tampa, and Miami. In other words, Florida is wet. And its structures require proper sealants, envelope details, and coating systems to protect them from deterioration and mold.

Glendale is well-versed in all aspects of waterproofing, sealant, and membrane systems.

Texture Coating

Texturing the largest Commercial and Industrial Spaces around.

Applying Texture Coating to new facilities isn't that special. Applying Texture Coating to New Facilities that will last a lifetime is an art. It also requires skill and well trained staff who are used to the rigorous cleaning, preparation and priming needed to insure the coating adhesion lasts forever.

Failure to properly remove bond breakers will kill a project. Quality control inspections to ensure the tilt up installer rubs out his imperfections takes a well trained eye. Proper spray techniques provide a uniform appearance.

Painting, Wallcovering, Decorative Finishes

If you or your designer has picked it, we've likely installed it.

Our staff is comprised of ex-coatings manufacturer reps, decorators, lifelong painting applicators, and experienced project managers and crew leaders. We not only have the expertise, but the experience to install any decorative or protective system.

Metallic finishes, dry-erase, magnetic, anti-microbial, anti-graffiti, we do it. Venetian Plaster, Spatula Stuhhi, Textured Duraplex, we do it. When it comes to wallcovering, Acoustical, Fabric, Natural Textile, Synthetic or Wood Veneer, somewhere we've installed it.